The cable as below (6m AV cable as default)

for wireless Transmitter receiver shown

 1,when you connect normal monitor 4.3 /5\" ,DVD wihtout trigger line ,please select this

2,when you connect portable GPS for  ,the plug is 2.5mm

IMPORTANT NOTE: if you will connect 7\" monitor or your DVd with reversing trigger line.please have to buy wireless receiver with trigger line,and please have to  pay for $1 ,CLICK here or below picture to pay for 1USD 

the blue line is ACC reversing the priority line

Connection:

Common problems and solutions(Kindly answer your questions:)

(1) Can this camera install on rearview mirror recorder?

NO, it can't ,Usually it can connect TFT monitor, mirror monitor,RCA DVD ,but can't support any Driver recorder.

(2) Can the camera fit my car ?

In different countries, car models can be differentiated Please check your car license plate light cover or trunk hand size before you buy ,thanks.Maybe a few of the country's camera are different.

(3)Do the camera have reference line?

there is reference line as default for rear camera

(4)About the video line, it is AV or AVIN(2.5mm) for portable?

AV is default,if you need AVIN ,please leave message follow your order(only support Shipment from China ).

(5).Why the image occurred jitter, splash screen, interference,unstable, Black and white  color when you  are reversing?

1) The image becomes black and white color just because you buy a wrong TV system. This camera built in NTSC system as default,

if your monitor is PAL system, it will be showed jitter , Black and white color.

Solution:

a. Please set up the GPS TV system as automatic firstly when using, then see whether it still can set the system.

 Because there are many monitor with 2 system in market, it can set. But some old-type GPS can't set. So please choose the right system to fit the camera.

b. Please must check the right cable connection installation.

c. If above solutions still can't deal, please ask your local professional car staff for help.

2) The image occurred jitter, splash screen, unstable just because the

voltage is lower than we suggest.

Solution:

Different place and using-situation will occurred some of the car output voltage is different. Car reversing is not powered by DC,

it will add a Pulse signal to disturb , so it will unstable .So we suggest you need check the voltage whether as 12V,or please add a delay to use.

(6)our car have video and power cable,Can you use it when I buy this camera?

Yes, it can, it support RCA plug. But we suggest you don't use youself cable, because the line may be aging and defined different .

7.How to install?

a. For universal camera, it installs through 2 screws and backrest or .it can fix near the location of license plate light.

b. For dedicated camera, it installs in license plate light directly. We suggest you install the camera in professional car modification and beauty shop

 NOTES: The Night vision is just in case of reversing lamp, the Picture comes from real recording Video .