FSHTI-1 is a wireless charger with strong practicability.

1. About 80% of the charging efficiency, the maximum power 10W, QC3.0 and FOR apple 7.5W adaptive quick charge function; 2. The whole chip design, digital mediation, to ensure efficient and better design concept, to further improve the whole stability and reliability of the products, full load, the engine temperature about 40 degrees Celsius;   3. The product also has the following characteristics: l input overpressure and overcurrent protection; Temperature protection; L reliable and accurate foreign body detection function (FOD); L LED charging and failure status indication; Built-in accurate communication mediation circuit; L select the buzzer charging reminder function; for Apple 7.5W quick charge time up to 30 minutes;       Product usage   1. Connect charging cable to wireless charger and power supply; 2. After the indicator light is switched on for 2 seconds, it will go out, and the hand machine will be placed in the sensory area to recharge. Note: 1. The charging equipment must conform to the Qi standard to be used. 2. Charging power and efficiency depend on the device being charged; 3. for Apple 7.5W quick charge requires the charging head of QC3.0;  

Indicator light

  1. In standby mode, the indicator light is not on; 2. After the power is switched on, the indicator light turns on for about 2 seconds and then goes out. 3. When charging, the blue indicator is always on; 4. When the foreign object or placement error is detected, the red indicator will always be on and the fault will be excluded. The second is extinguished; 5. The temperature is too high and the red light flashes; 6. The blue and red indicators are always on when the electricity is full;    

Matters needing attention

1. Do not squeeze or impact the product; 2. Do not disassemble, dismantle or modify the product by itself; 3. Do not close the product to the fire or put it into the fire; 4. Please do not use the wireless charger in severe high temperature, humidity or corrosive environment. Electric leakage in the free circuit; 5. Please do not place too close to the magnetic card (id card/card, etc.) with magnetic stripe or chip. Avoid magnetic failure; 6. Do not place metal or metal phone cases on the charger; 7. Please keep the implanted medical device (pacemaker/implantable cochlear implant, etc.) and wireless charger; The distance between the two is at least 20CM, so as to avoid the potential interference of medical equipment. 8. Please keep the charger away from water or other liquids; 9. If you need to clean the charger, please ensure that the power is disconnected; 10. Do not use toys for children; 11, using the environment temperature kept at 0 to 40 ℃.