200 Вт 4 Cob CREE CXB3590 полный спектр светодиодных растительных фитоламп комплект 3000К/3500К/5000К/6500К Минвелл диммируемый светодиодный драйвер HLG-185H-C1400B.

200 Вт 4 Cob CREE CXB3590 полный спектр светодиодных растительных фитоламп комплект 3000К/3500К/5000К/6500К Минвелл

Description

200w 4 Cob CREE CXB3590 full spectrum led grow lights Kit 3000K/3500K/5000K/6500K Meanwell dimmable Led Driver HLG-185H-C1400B

This kit contains the following components:

4pcs of Original CREE COB CXB3590

4pcs of thermal tape

4pcs of Ideal holder 50-2303CR

4pcs of D100mm glass lens 90 degree
4pcs of Pre-drilled Passive heatsink Φ133*H70mm(for 55-65W)

1pcs of Original MW driver HLG-185H-C1400B

1pcs of TOCOS 100K linear potentiometer

+ Wago quick connectors+ Cables +Screws+ Plug

---- Original CREE Cob CXB3590:

---- Ideal holder:50-2303CR :

----- Meanwell Led Driver :

----  Pre-drilled pin fin heat sink for Led CXB3590

Heat sinks are used to enhance heat dissipation from hot surfaces. A heat sink does this by increasing the surface area that is in contact with the cooling fluid or air.
From board level heat sinks, to LED heat sinks, to high power heat sinks,our goals are to provide you the best heatsink that is the most cost effective and highest quality. Our employees will see that we do whatever we can to make this happen.

Compatible with Citizen CLU-048 COB :

1.Pre drilled for Citizen CLU-048 with Ideal Holder 50-2204CT (not included)
2.Pre drilled for reflector adapter 50-2100AN and LEDiL F13838_ANGELINA-XW (not included)
3.Pre drilled for Citizen CLU-048 with BJB Holder 47.319.2030.50, 47.319.2033.50, 47.319.2314.50, 47.319.2315.50 and reflector F13839_ANGELINA-XW(not included)"
4.Pre drilled 100mm Glass lens with 112mm diagonal mounting positions. (not included)
5.4x M3 screw positions on outer perimeter and 2x M3 screw positions on sides for mounting heatsink

Compatible with Bridgelux Vero 29 COB :

1.Pre drilled for Bridgelux Vero 29 (not included)
2.Pre drilled for reflector adapter LEDiL C13584_CLAMP-VERO29 and LEDiL F13838_ANGELINA-XW (not included)
3.Pre drilled 100mm Glass lens with 112mm diagonal mounting positions. (not included)
4.4x M3 screw positions on outer perimeter and 2x M3 screw positions on sides for mounting heatsink

Compatible with Cree CXB 3590 COB :

1.Pre drilled for Cree CXB 3590 with Ideal Holder 50-2303CR (not included)
2.drilled for reflector adapter 50-2300AN and LEDiL F13838_ANGELINA-XW (not included)
3.Pre drilled 100mm Glass lens with 112mm diagonal mounting positions. (not included)
4.4x M3 screw positions on outer perimeter and 2x M3 screw positions on sides for mounting heatsink

---- Glass Led lens :

D100mm , 60 degree, 90 degree and 120 degree available.

Please Kindly Note:

Import duty or tax are not included in the item price or shipping fees.These charges are buyer's responsibility .

Thank you so much!