2019 New Arrival Auto Gearbox Oil Exchange Cleaning Machine ATF-6000 Automatic transmission gearbox changer

Original Auto Gearbox Oil Exchange Cleaning Machine,Automatic transmission gearbox changer ATF-6000 ATF6000

Auto Transmission Fluid oil Changer
Driving force: ( Electric) DC12V 
Small Gasoline Motor Car & Diesel Vehicle

Specifications:

Flow direction automatically controlled and equal amount exchange system

Oil cycling flow speed monitor

Change the oil by the power of gear-box and the exchanger

Automatically shift to oil-extracting function after completed oil exchanging

Effectively protect the gear-box and remove the grease and metal fillings

Assure equal amount exchange

Driving force:  ( Electric) DC12V

Pressure gauge: 0-60PSI

Weight:       38KG

Measure:      365*445*940mm

Scope:   Small Gasoline Motor Car & Diesel Vehicle

Performance steps 

*Fill the new oil barrel into the 12 liters of automate gearbox barrel.Turn the left switching valve to “PRESSURE”,and the righe to “RECYCLE”.If external new oil is needed ,then link the transparent *vitta and the external new oil:”FILLING”,and turn the right switching valve to “FILLING”

*Find out the cool off oil vita ATF,which is easy to destuff,remove the joint. Start the engine temporarily and judge the direction of the outlet and input oil of both side.

*Link the cool off oil   witta and the sphere valve,link the red outlet oil valve to the native machine”RETURN”,while the input oil vitta is linked to the native machine`s blue plstic oil vitta “PRESSURE”.

*Butt the roof of the car,since every impetus gear needs operating.

*Link the compressor and the joint “AIR”

*Start the engine,Cutting in gear makes the used oil in the automate gear box barrel back to the native machine`s used oil barrel to 3-4 liters.

*Switch down the sphere valve of red outlet oil vitta, turn on the switching valve of the native machine(“+”direction means enlarging the volume,”_”direction means diminishing the volume),first adjust the pressure to 30PSI,then begin to fill new oil into the gear box,anto-speed-variable box then begins the exchange of new and used barrel,decide whether to enlarge of diminish the pressure.

*The inspection window of the machine “NEW OIL“is which the new oil runs through,the inspection windou of the outlet oil “USEDOIL”is which the used oil of gearbox runs through.

*Pay attention to the change of volume and color of the oil in the inspection windou of the outlet oil”USED OIL”,then we can adjust the volume at any time in order to meet the need of the oil volume in the gearbox,until the outlet oil change from foul into the same color as new oil.

*While the new oil and used oil is exchanging,every geer is shifted.Stay for 5-10seconds depending on complexion.

*Connect the vitta of gearbox,start the engine,fill in “P” oil catch,supply ATFoil depending on oil level,meanwhile check if there is any oil leaked.When the oil level is enough,check every mile when attempt to drive .(which is absolutely nessasary)

 Cleaning Diagram        connector units            Cleaning oil