ПРОЕКТОРНАЯ ЛАМПА МОДУЛЬ POA-LMP108 ДЛЯ SANYO PLC-XP100/PLC-XP100L С ЗАМЕНОЙ В СБОРКЕ ПОДАРОЧНАЯ ДОСТАВКА

Description

If You Want Your Projector Lamp Work Last Longer, Please Note:   1.Do not allow the projector to overheat; the primary cause of lamp failure is excessive temperature stress.   2.Allow the projector lamp to cool for at least 10 minutes after powering down, and never move the projector during this period or while the lamp is on. The lamp is much more susceptible to damage while it is hot.   3.Operate your projector in a clean, relatively dust-free environment to prevent clogging of fans and air filters. These filters should be cleaned regularly.   4.Allow plenty of space around the projector's fan or exhaust so excess heat can be dispersed properly.   5.Utilize the "economy mode" if it is available with your projector model and is appropriate for your situation. This mode decreases projector brightness but the lamp will last longer.

6.Never leave a projector in very hot or very cold environments, for example in a car on a summer or winter day.

POA-LMP108 Projector Lamp Bulb Module for SANYO PLC-XP100/PLC-XP100L Replacement Bulb with Housing Free Shipping

1. Item: POA-LMP108 2. Watt: 330W 3. Life time: about 3000h 4. Warranty: 180 days from you get the lamp 5. Place of Origin: Shenzhen, China (Mainland) 4. Fit for Projectors: SANYO  PLC-XP100/PLC-XP100L , etc.   If you can't find your lamp model No., or have any question, please don't hesitate to contact us. Your message will be responsed within 12 hours.^^

---