Litake N1201SA 137.5MHz-2.7GHZ Antenna Analyzer Meter Tester Radio UV RF Impedance | Инструменты

Litake N1201SA 137.5MHz-2.7GHZ Antenna Analyzer Meter Tester Radio UV RF Impedance |

Description:

Item type:Meter

Model: N1201SA
Working currency 137.5MHz~2700MHz
Stepped frequency 1kHz
Display 2.4cun TFT trdp
Resolution ratio 320*240(QVGA)
Battery capacity: 2000mAH(7.4Wh)
Power consumption less than 1.5W
Charge current 400mA
Charge port USB
Connector SMA-K
Impedance measurement range: 0.1~1000
Standing wave measurement range:1.000~65
S11(dB)measurement range: 0dB~-60dB
Working temperature:0~40 degree
Atmospheric pressure:860hPa~1060hPa

Packing list:

1 x N1201SA Antenna Analyzer Meter
1 x User Manuel
1 x Charge Line

Notes:

1. Interface: this instrument has four interfaces: single point measurement, scanning function, system information, calibration and calibration of cable length measurement and characteristic impedance measurement interface is unique to N1201SA+. Boot into the single point measurement interface by default. The setting parameters are saved automatically after the product is shut down. The interface is set exactly as before it is shut down when it is started again. It is easy to use.
2. Switch machine: press the CTRL key and press the switch button to start up.Boot mode, long press (more than 2S) switch machine, loosen, the instrument will shutdown boot mode, long press (more than 2S) switch machine, loosen, the instrument will shut down. In order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.