Беспроводной предупредительный свет USB для Renault Espace Twingo Clio ZOE Kwid SYMBIOZ ARKANA Duster EZ-PRO Lodgy Alpine A110.

 

Specifications:   This is Solar Powered Simulated Dummy Alarm Warning ,Anti-Theft Flashing Light  for protect  your property from potential thieves at night. Important : It is a fake alarm light, not really alarm system.   Compatible Model:Universal Material: ABS Color: red, blue Working voltage: 0.05V Working current: 0.02A Power: 0.01W Size: 50*25*14mm Power :Built-in high capacity Ni-mh battery,Solar charging,  USB charge supported. Install:With self-adhesive sticker, can be easily installed on the car instrument panel, door side, car grille, bumper, as warning or decorative lights Function: Built-in light sensor, this LED light will flash in nighttime and will not flash in daytime. (You can cover the other end by dark paper if you want it to flash in daytime.) Flashing light :5 seconds/time. Use: Car or others   Features:  The light can discourage break-ins in nighttime. Easy to install and looks clean on your dash panel. Built-in light sensor, this LED light will flash in nighttime and will not flash in daytime. This LED alarm light does NOT require a car alarm system. No wires needed, just stick it to the roof of the vehicle with corresponding glue. Solar energy can be absorbed and saved in high efficiency solar cells.Quick and fast charging with solar light Do not need to install battery. It's powered by solar. It can blink for whole night after enough sun shining in daytime. You need not put it under sunshine directly. Sunshine above the dashboard is enough. It can be charged by solar whether you put switch to "on" or "off". Switch is tiny. You need a ballpen or little stick to push it.   Package content include: 1pc Simulated Dummy Alarm LED Light   Only the above package content, other products are not included. (Note:This item come without retail box,and we will pack well before shipping.)   Installation Method:    Easy to install,Clean the car surface, keep it dry, Easily Installation directly.No Need Drilling Required,no need of welding.   Before installation, thoroughly clean the surface of installing position.make sure that the target area is clean, no oil.   The double-sided adhesive tapes on its back enables it to be pasted directly .  Please note that please use the heat gun to warm up the adhesive tape before installed, to make the item stick tightly   You'd better heat the adhesive tape by hair dryer to Enhanced viscosity.   Please note that please use the hair dryer to warm up,    the adhesive tape before installed, to make the item stick tightly. (No need too hot)    How to use:   1.Clean and dry the area where you want to install.   2.Check the place.Tear off protective film of double-sided adhesive tapes at back.   3.Paste in car position where the sun can shine.(Important !!!)    Note: 1.Compare The Detail Sizes With Yours,Please Allow 1-3 mm Differs Due To Manual Measurement,Thanks! Please compare the detailed sizes with yours before you buy ! 2.Real color may slightly different from pictures due to computer screen's resolution,brightness,contrast etc.Hope understanding. 3.Please leaving a message before you give the bad feedback, if the products have some problems. Thanks for your understandings    

 

 

---