Aluminum Alloy Arduino 4 Dof Robot Arm With Claw Gripper Manipulator Servo Bracket Mechanical DIY Unassembled | Игрушки и хобби

Aluminum Alloy Arduino 4 Dof Robot Arm With Claw Gripper Manipulator Servo Bracket Mechanical DIY Unassembled | Игрушки и

Aluminum Alloy Arduino 4 Dof Mechanical Arm With Claw Gripper Manipulator Servo Bracket Mechanical Claw DIY Robot

Parameters:

Total weight of the kit: 550g(Included the servos) Robot arm height: 35.5cm

Gripper Parameters:

Working voltage: 4.8-6V Claw material: all aluminum alloy Claw weight: about 68g (excluding servo) Claw maximum opening angle: 52mm Overall length of paw: 115mm (the overall longest length when the paw is closed) Overall width of paw: 100mm (maximum overall width of paw when opened)

180 Degree Servos Parameters:

Product size: 40.7 * 19.9 * 42.9mm Product tension: 15KG / 17kg / 20KG / 25kgcm (6V) Response speed: 0.17sec / 60 degrees (4.8v no load) 0.14sec / 60 degrees (6v no load) Working voltage: 4.8-6V Working temperature: 0 ℃ -55 ℃ Gear form: metal gear Working dead zone: 2us (microseconds) Three lines of servo connector: yellow-signal; red-positive; brown-negative

Shipping List:

Frame: 4 dof robot arm Frame(Not included servos) Frame+ servos: 4 dof robot arm Frame+ 4pcs 180 degree servos Controller: Arduino UNO board+ Shield board+ USB cable Full set: 4 dof robot arm Frame+ 4pcs 180 degree servos+Arduino UNO board+ Shield board+ USB cable

Note:

The product is unassembled. We offer the manual and source code.